Our company is a supplier of ELISA kits. The price is fair. The pre-sale, in-sale and after-sale services are at your service. Provide free test service, please call us! Rat Corticosterone / Adrenaline (CORT) Enzyme Linked Immunoassay (ELISA) Kit instruction manual This reagent is for research use only Purpose: This kit is used to determine the content of corticosterone / adrenaline (CORT) in rat serum, plasma and related liquid samples. Experimental principle: This kit uses the double antibody sandwich method to determine the level of rat corticosterone / adrenaline (CORT) in the specimen. Microporous plates were coated with purified rat corticosterone / adrenaline (CORT) antibody to make solid phase antibodies. Corticosterone / adrenaline (CORT) was added to the monoclonal antibody-coated microwells in turn, followed by HRP Corticosterone / adrenal ketone (CORT) antibody binds to form an antibody-antigen-enzyme-labeled antibody complex. After thorough washing, the substrate TMB is added for color development. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The color depth is positively correlated with the corticosterone / adrenaline (CORT) in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the concentration of rat corticosterone / adrenaline (CORT) in the sample was calculated by a standard curve. Kit composition: Kit composition 48 hole configuration 96-well configuration save Instructions 1 serving 1 serving Sealing film 2 pieces (48) 2 pieces (96) sealed bag 1 1 Enzyme coated plate 1 × 48 1 × 96 Store at 2-8 ℃ Standard product: 2700ng / L 0.5ml × 1 bottle 0.5ml × 1 bottle Store at 2-8 ℃ Standard dilution 1.5ml × 1 bottle 1.5ml × 1 bottle Store at 2-8 ℃ Enzyme reagent 3 ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ℃ Sample diluent 3 ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ℃ Developer A liquid 3 ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ℃ Developer B liquid 3 ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ℃ Stop solution 3ml × 1 bottle 6ml × 1 bottle Store at 2-8 ℃ Concentrated washing liquid (20ml × 20 times) × 1 bottle (20ml × 30 times) × 1 bottle Store at 2-8 ℃ Precautions: 1. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing. 2. The sealing film is limited to one-time use to avoid cross-contamination. 3. The sampler should be used at each step of sample addition, and the accuracy should be regularly checked to avoid test errors. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples. 4. The kit should be equilibrated at room temperature for 15-30 minutes before being taken out of the refrigerated environment. If the enzyme label coated plate is unopened, the strip should be stored in a sealed bag. 5. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the test substance in the specimen is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please first dilute it with a certain multiple (n times) of the sample diluent and then determine it. When calculating, please multiply the total dilution Multiple (× n × 5). 6. Please keep the substrate away from light. 7. Strictly follow the instructions, and the test results must be determined by the microplate reader. 8. All samples, washing liquids and various wastes should be treated as infectious agents. 9. The components of different batches of this reagent shall not be mixed. 10. If there is any difference with the English manual, the English manual shall prevail. Steps 1. Add sample: set up blank wells separately (the blank control wells do not add samples and enzyme-labeled reagents, the rest of the steps are the same) and the sample wells to be tested. Add 40μl of sample diluent to the test sample well of the enzyme-coated plate, and then add 10μl of the test sample (the final dilution of the sample is 5 times). Add the sample and add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, shake gently to mix. 2. Dilution and loading of standard products: set 10 standard wells on the enzyme-coated plate, add 100 μl of the standard products in the first and second wells, and then add the standard products in the first and second wells 50μl of diluent, mix well; then take 100μl from the first well and the second well and add them to the third and fourth wells respectively, and then add 50μl of standard diluent to the third and fourth wells respectively, mix well; Then take 50μl each in the third and fourth wells and discard it, then add 50μl each to the fifth and sixth wells, and then add 50ul of the standard dilution solution to the fifth and sixth wells respectively, and mix well; After mixing, take 50μl from the fifth and sixth wells and add them to the seventh and eighth wells respectively. Then add 50μl of the standard dilution solution to the seventh and eighth wells respectively. Take 50μl from the eight wells and add them to the ninth and tenth wells. Then add 50μl of the standard dilution solution to the ninth and tenth wells. After mixing, take 50μl from the ninth and tenth wells and discard. (After dilution, the volume of each well is 50μl, and the concentration is 1800ng / L, 1200ng / L, 600ng / L, 300ng / L, 150ng / L) 3. Incubation: Seal the plate with a sealing plate and incubate at 37 ° C for 30 minutes. 4. Mixing solution: Dilute 30 times (20 times of 48T) concentrated washing liquid with distilled water 30 times (20 times of 48T) and then use. 5. Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing liquid, let it stand for 30 seconds and then discard, repeat 5 times and pat dry. 6. Incubation: The operation is the same as 3. 7. Washing: The operation is the same as 5. 8. Color development: Add 50μl of developer A to each well, and then add 50μl of developer B, mix gently, and develop at 37 ° C in the dark for 15 minutes. 9. Add enzyme: add 50μl of enzyme label reagent to each well, except blank well. 10. Termination: Add 50μl of stop solution to each well to stop the reaction (at this time the blue will turn to yellow). 11. Determination: Measure the absorbance (OD value) of each well in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution. Sample processing and requirements: 1. Serum: room temperature blood coagulates naturally for 10-20 minutes, centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully and centrifuge again if a precipitate appears during storage. 2. Plasma: EDTA or sodium citrate should be selected as the anticoagulant according to the requirements of the specimen, mixed for 10-20 minutes, and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again. 3. Urine: collected in a sterile tube and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, centrifuge again. Pleural and ascites, cerebrospinal fluid reference implementation. 4. Cell culture supernatant: When detecting secreted components, collect with a sterile tube. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. When detecting the components inside the cells, dilute the cell suspension with PBS (PH7.2-7.4), and the cell concentration will reach about 1 million / ml. Through repeated freezing and thawing, the cells are destroyed and the intracellular components are released. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again. 5. Organize the specimen: after cutting the specimen, weigh it. Add a certain amount of PBS, PH7.4. Quickly freeze and save with liquid nitrogen for later use. After the specimen melts, it still maintains a temperature of 2-8 ° C. Add a certain amount of PBS (PH7.4) and homogenize the specimen with a manual or homogenizer. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. After aliquoting, a portion is to be tested, and the rest is frozen for future use. 6. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided. 7. The sample containing NaN3 cannot be detected because NaN3 inhibits the activity of horseradish peroxidase (HRP). Kit performance: 1. The correlation coefficient R between the linear regression of the sample and the expected concentration is above 0.95. 2. The batch and approval shall be less than 9% and 11% respectively Calculation: Taking the concentration of the standard as the abscissa and the OD value as the ordinate, draw a standard curve on the coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; then multiply it by the dilution factor; Calculate the linear regression equation of the standard curve with the OD value, substitute the OD value of the sample into the equation, calculate the sample concentration, and multiply it by the dilution factor to obtain the actual concentration of the sample. examination range: 100ng / L -2000ng / L Storage conditions and validity period: 1. Store the kit: 2-8 ℃. 2. Validity: 6 months Bowl Shaped Cat Scratcher, Hexagon Scratching Board, Lotus Shaped Scratching Board included.Provide your pet with Cat Scratcher posts & scratch mats to satisfy your cat's natural scratching instincts and Our loungers,corrugatedscratchers and boards let her sharpen her claws without damaging your furniture. Cattery Scratching Board,Bowl Shaped Cat Scratcher,Hexagon Scratching Board,Lotus Shaped Scratching Board Jining Jiaxing Packaging Co., Ltd. , http://www.petcarton.com
Rat Corticosterone / Adrenaline (CORT) Enzyme Linked Immunoassay (ELISA) Instructions